Fona SIM808 GSM/GPS Shield

Product Code
:
15831
Brand / Origin
:
Adafruit
Quantity
:
10+
Without Vat
:
408.26 TL
Quantity:

-

+

Aynı Gün Kargo
Saat 15:00’e kadar yapılan alımlarda aynı gün kargo imkanı
Add to Favorites
Bu ürünü listenize ekleyerek daha sonra inceleyebilirsiniz.
- Li-Po Bataryalar Hk. - , Li-Po bataryalar ile ilgili çalışmamız devam sürmektedir, fakat stoğa giriş tarihi malesef şuan için belli değildir.
5/ 5
- Lipo pil - , Shield Özelliklerinde 1 hücreli 500mAh üzeri LiPo&tt2;ları bu kart ile kullanabileceğimizi belirtmişsiniz aynı zamanda linklerinide paylaşa bilirmisiniz sitede arıyorum bulamıyorum. (GSM ve GPS linklerini paylaşmışsiniz çok iyi olmuş)
3/ 5
- Alternatif Ürün Bakın - , Bu ürünün muadili farklı bir ürününüz var mı? Bir haftadır üzerinde calıstırmama ragmen 2G sim kartı ile denedğimdehiç bağlantı alamıyorum. Kart üzerinde temazsızlık oluyor sürekli
3/ 5
33.6666666666667 Add Comment
Share:
Featured Campaigns Related the Product

{{CMP.TITLE}}

{{CMP.DESCRIPTION}}

  • Features
  • Payment Options
  • Comments (3)
  • Recommend
  • Images
  • Suggestion Box
  • It is a shield with SIM808 module which makes you able to use GSM communication and GPS features with your Arduino.With this shield you cand send and receive SMS, trace a location and you can even build your own cell phone.SIM808 module on card functions as GSM communicator and GPS receiver.


    All GSM/GPRS shield and modules's IMEI numbers are approved by BTK and registered. You can use them in your projects with clear consience :)

    To use the product you need a GSM antenna and a GPS antenna (alternative - small) .
    GSM Specifications:
    • Supports Quad-band 850/900/1800/1900MHz , compatible with all 2G networks all around the world
    • Inner MT3337 GPS receiver, -165dBm precision, control on same serial port
    • Earphone/ microphone outputs on card or external 32 ohm speaker + supports voice calls with electret microphon
    • Sending and receiving SMS
    • Sending and receiving GPRS data (TCP/IP, HTTP vb.)
    • PWM/Buzzer vibration motor control
    • Supports AT command lines, UART communication with automatic baud raye settings
    GPS Specifications:
    • 22 tracking/66 acquisition channel
    • GPS L1 C/A code
    • Precision: Tracking: -165dBm, Cold start: -148dBm
    • Finding Location Time(typical): Cold start: 32sn, Hot start: 1sn, Warm start: 5sn
    • Accuracy: ~2.5m
    Shield Specifications:
    • Inner LiPo battery charging circuit, you can use LiPos with 1 cell 500mAh and above with this card
    • Charge status and battery full display LED's
    • 3.5" TRRS earphone jak input, supports earphones with microphones
    • Connectors for 32 ohm speaker and electret microphone
    • Logic level converter so module can work with Arduino compatibly.
    • Vibration motor driver
    • Seperate u.FL connectors for GSM and GPS antennas
    • Power and network status display LED's
    • Sim slot for all 2G supporting cards
    LiPo battery and antennas are not included. You need to purchase them seperatly.

    Dimensions: 69.0mm x 54.0mm x 4.0mm
    Weight: 19gr
Prepared by  T-Soft E-Commerce.