The line following robot is a robot type that can complete a certain path autonomously. This path should consist of two contrasting colors. An example of this is the black line on a white or white background.

The line tracking robot kit is developed for international competitions such as National MEB Robot Competitions, METU Robot Days, ITURO and "Robochallange", "Infomatrix", ...

It provides high precision, thanks to the QTR-8RC Line Sensor Card with eight sensors. It performs smooth direction changing and speed increase and decrease without delay because of since PID is programmed.

Easy to install and fun to install, requires simple soldering during installation. Installation takes 30 to 45 minutes.

Package Included:

• 1 x Profuse 3S 11.1V 25C 450mAh Lipo Battery
  
• 1 x Arduino Uno R3 Clone
  
• 1 x QTR-8RC Line Sensor Board
  
• 2 x 12V 2000rpm 10: 1 DC Motor
  
• 2 x Wheel
  
• 2 x Mini drunk Wheel
  
• 6 x Plastic Clamp
  
• 1 x Motor Driver Board
  
• 4 x Two Color Short Cable
  
• 1 x 10Lu 30cm Female-Male Jumper Cable
• 1 x Fline Chassis
  
• 1 x Type B USB Cable
  
• 1 x Switch

The robot that follows the line is the most preferred line between its competitors because of its software and hardware development. You will be able to define the features you want, thanks to the open source code.

The following line is suitable for robot development and is compatible with 2500 Rpm Motor and SLT20 Wheel products Fline kit.

You can control the speed and direction of the two motors independently of each other, but also support 2A current per channel.

You can control the speed and direction of the two motors independently of each other thanks to the Ardumoto driver board, but also support 2A current per channel.

Fline line following robot program in the Arduino Uno R3 is ready  to play. In this way, you can complete the installation of the kit quickly without having to connect to your computer.

Document:

• Click here for Arduino Library of QTR-8RC Line Sensor Card.