DIY Traveler Model Plane Set

DIY Traveler Model Airplane Kit

Would you like to make a quick start into the model airplane hobby? Follow the guide included in the set, assemble your airplane, find the correct throwing angle, and enjoy flying your aircraft to the fullest.

The Traveler Model Airplane Kit is an easy-to-build and highly enjoyable DIY set. It is an affordable beginner-level product suitable for those who are interested in model aircraft or enjoy flying objects. The wing assembly is made from lightweight insulation foam. A spare wing set is also included in case of performance-affecting damage such as cracks or breaks. 

To assemble the model, first attach two wooden mounts to the wooden fuselage by aligning them with the protrusions on the fuselage. One of the mounts in the set is a spare. Then, attach the tail wing and rudder to the fuselage using the double-sided tapes pre-applied on their backs. Finally, insert the main wing into the notch on the fuselage and secure it with the rubber band. You can enhance the appearance of the plane by applying the included stickers or your own custom designs. After a few test flights, you will figure out the ideal throwing angle and learn how to get the best performance out of your plane.

For optimal flight performance, choose windless weather conditions. With a slight 10-degree forward throw in calm air, the airplane can reach a range of 10–15 meters. If thrown from a higher spot, it can achieve a flight distance of approximately 40–50 meters. After flying, any cracks on the wings can be repaired using tape.

Package Contents:

• 1 x Laser-Cut Fuselage Stick

• 2 x Three-Piece Laser-Cut Wing Set

• 3 x Wooden Wing Mounts

• Rubber Band

• Stickers

• Assembly Guide

Technical Specifications:

• Box Size: 40 × 10.2 × 4.2 cm

• Wing Width: 40 cm

• Fuselage Length: 30 cm

Useful Links / Documents:

• User Manual

Similar Products:

• DIY Kits
• Science Park Products