sadsad x

Tosso Remote-C Remote Control

Product Code
Brand / Origin
Tosso Engineering
Without Vat
340.00 TL



Same Day Shipping
Orders placed until 3:00 on weekdays and 10:30 on Saturday are shipped the same day.
Add to Favorites
Click here to add this product to your list and review it later.
Technical Service
We are always with you with our experienced staff and advanced support services.
Refund Guarantee
We carry out the process without upsetting you with a 14-day return guarantee.
Add Comment
Featured Campaigns Related the Product



  • Features
  • Payment Options
  • Comments (0)
  • Recommend
  • Images
  • Suggestion Box
  • Tosso Remote-C Remote Control

    Tosso Remote-C; It is a remote control that will help you in all your projects that need wireless communication from RC vehicles by allowing you to make wireless communication at 2.4GHz frequency using NRF24L01. There are 2 90c, 2 12mm and 2 joysticks on the remote, a total of 6 buttons, 2 toggle switches, 2 potentiometers, 2 joysticks, 1 Oled display, 1 mpu6050 (speed accelerometer) as power source. 18650 li-on batteries are used.

    With Tosso Remote-C you can use RC vehicles, spider robots, drones, gliders, etc. You can use it in all your projects that need to be remotely controlled.

    Tosso Remote-C Uzaktan Kumanda.jpg (47 KB)

    Tosso Remote-C Specifications:

    • Microcontroller ATmega328
    • Operating voltage 5V
    • Input voltage 5V
    • Current 1A for 5V Output
    • Current 1A for 5V Output
    • Flash Memory 32 KB (Atmega328) 0.5 KB is used by the bootloader
    • SRAM 2 KB (Amega328)
    • EEPROM 1KB (Atmega328)
    • Clock Speed ​​16MHz
    • Frequency 2.4GHz ~2.5GHz
    • Multi frequency: 125 Frequency
    • Supports up to 6 channels of data reception
    • Length: 152.84mm
    • Width: 91.44 mm


    Tosso Remote-C gets its power from 2 18650 LI-ON batteries on it. It can be charged from the mini USB on these batteries, which will also be programmed.



    The Atmega328 has 32 KB of flash memory (about 0.5 KB is used by the bootloader). It has 2KB SRAM and 1KB EEPROM.



    The Tosso Remote-C board is programmed with the "Arduino IDE". You can start programming by selecting the Tosso Remote-C card under Tools > Board tab in the program, but before doing this, if you are using this card for the first time, you must first add the "TossoDuino" card to your computer. A special software called "Bootloader" is installed via Atmega328 on TossoDuino. In this way, you do not need to use an extra programmer while programming the card.


    Package Included:

    • 1 x Tosso Remote-C
    • 1x NRF24L01
    • 1X128x64 Oled display
    • 1X Programming cable

    Useful Links:

Prepared by  T-Soft E-Commerce.