Out Of Stock
Notify me when its in stockRaspberry Pi Camera 3 NoIR
Raspberry Pi Camera 3 NoIR is the latest member of the Raspberry Pi camera family, featuring a new 12-megapixel Sony IMX708 image sensor, improved low-light sensitivity, autofocus and HDR support. The NoIR version is sensitive to infrared light but does not have an infrared (NoIR) filter on the lens. This makes it perfect for infrared photography and photo / video shooting in low-light environments. For night photography, you need to illuminate the target with infrared light. In addition, the module supports 4608 x 2592 pixel images and 4608 x 2592 @14 FPS / 2304 x 1296 @56 FPS / 1536 x 864 @120 FPS video. When HDR is enabled, the resolution is limited to 2304 x 1296 @30 FPS.
If you want to use it with Raspberry Pi 5, you can choose the Raspberry Pi Camera Cable Standard - Mini - 500mm product.
Raspberry Pi Camera 3 NoIR Compatible Accessories:
Raspberry Pi Camera 3 NoIR is mechanically identical to the previous V2 version except for the sensor section. However, the new sensor is larger and may not fit all camera housings designed for the previous version.
Raspberry Pi Camera 3 NoIR Compatible Software:
Raspberry Pi Camera 3 NoIR can only be used with libcamera. Since it requires a new driver and a specific libcamera version, you need to update Raspberry Pi OS.
Raspberry Pi Camera 3 NoIR Compatible Board Models:
Raspberry Pi Camera 3 NoIR is compatible with all Raspberry Pi boards that have a camera connector (CSI connector). To use this camera with Raspberry Pi Zero, which has a smaller connector, you need an adapter cable.
Raspberry Pi Camera 3 NoIR Technical Specifications:
Image Sensor: Sony IMX708
Megapixels: 12
Resolution: 11.9 Megapixels
High signal-to-noise ratio (SNR)
Built-in 2D dynamic defective pixel correction (DPC)
QBC re-mosaic function
HDR mode (output up to 3 megapixels)
CSI-2 serial data output
Phase detection autofocus (PDAF) for fast autofocus
Common video modes: 1080p50, 720p100, 480p120
Output: RAW10
IR cut filter: Not available
2-wire serial communication (supports I2C Fast Mode and Fast Mode Plus)
2-wire serial control of the focus mechanism
Horizontal / vertical resolution: 4608 x 2592 pixels
Autofocus system: Phase detection autofocus
Cable connector: 15 x 1 mm FPC
Sensor size: 7.4 mm
Pixel size: 1.4 x 1.4 µm
Dimensions: 25 x 24 x 11.5 mm
Raspberry Pi Camera 3 NoIR Lens Specifications:
Standard: Effective focal length 4.74 mm
Aperture: f/1.8
Diagonal field of view: 75° (at 16:9)
35 mm equivalent focal length: approximately 28 mm (full width) – 30 mm (3:2 crop)
Focus range: 10 cm – infinity
Wide: Effective focal length 2.75 mm
Aperture: f/2.2
Diagonal field of view: 120° (at 16:9)
35 mm equivalent focal length: approximately 16 mm (full width) – 18 mm (3:2 crop)
Focus range: 5 cm – infinity
Raspberry Pi Camera 3 NoIR Compliance:
FCC 47 CFR Part 15, Subpart B, Class B digital device
Electromagnetic Compatibility (EMC) Directive 2014/30/EU
Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU
Similar Products:
Products That Can Be Used Together:
Useful Links / Documents: