Improved GrovePi+ Starter Kit with 12 well-selected Grove Sensors
All you need to do is only plug the GrovePi+ Board on Raspberry Pi to use this kit. In this way you can start prototyping with Raspberry Pi in the quickest way.
GrovePi+ can be directly plugged on Raspberry Pi. It does not need any external connections. The connection between Raspberry Pi and GrovePi+ is actualised by I2C interface. All Grove modules can be connected to GrovePi+ Board via 4-pin connector cable.
These modules provides analog or digital outputs and they are connected to Atmega328 microcontroller on the GrovePi+ Board. Microcontroller acts as a interpreter between Raspberry Pi and Grove sensors. It sends and takes commands and operates the commands sent by RaspberryPi.
Note: This kit does not includes Raspberry Pi.
Note: This kit is compitable with Raspberry Pi 2. For detailed information, please refer to Dexter Blog page.
- Grove - Sound Sensor
- Grove - Temperature & Moisture Sensörü
- Grove - Light Sensor
- Grove - Relay
- Grove - Button
- Grove - Ultrasonic Distance Sensor
- Grove - Rotary Angle Sensor
- Grove - Buzzer
- Grove - Blue Led
- Grove - Green Led
- Grove - Red Led
- Grove - LCD RGB Backlighted
- GrovePi Manual
- 10 x Connector Wires