sadsad x

SparkFun ESP8266 Development Board

Product Code
Brand / Origin
Without Vat
328.64 TL



Same Day Shipping
Orders placed until 5:00 on weekdays and 10:30 on Saturday are shipped the same day.
Add to Favorites
Click here to add this product to your list and review it later.
Technical Service
We are always with you with our experienced staff and advanced support services.
Refund Guarantee
We carry out the process without upsetting you with a 14-day return guarantee.
Add Comment
Featured Campaigns Related the Product



  • Features
  • Payment Options
  • Comments (1)
  • Recommend
  • Images
  • Suggestion Box
  • This development board, which you can use at your IoT projects, has ESP8266 chip. Like other microcontrollers, ESP8266 can be used at LED blink, read sensor value, drive relay, etc. This SoC chip not only can do all microcontroller's functions, but also has IEEE 802.11 b/g/n WiFi connection. Board can be programmed With Arduino IDE (Look at the documents for add-on).

    FTDI USB-serial converter is available on the board. Through this, you can program this board directly with USB B type cable. There is no necessery to another converter.

    Board's pins are compatible with breadboard. If you solder proper connector(2-pins JST or 3.5mm connector) to connection which is next to the USB port, you can supply your board with 3.7V(1S) LiPo battery. There is not charge circuit on board. Connect a proper antenna to uFL connector is possible for ensure a more powerful WiFi signal.
    ESP8266 modul works with maximum 3.6V.maksimum. A 3.3V regulator is available on the board and logic level of this regulator is 3.3V. You need logic level converter to run this regulator with 5V signal.
    Headers on the board send as solderless.
    • All ESP8266 pins are on the board
    • Internal FTDI USB-serial converter
    • IEEE 802.11 b/g/n support
    • WiFi Direct (P2P) and soft-AP support
    • Internal TCP/IP protocol stack
    • Internal TR switch, balun, LNA, power amfi and network matchup
    • Internal PLLs, regulators, DCXO and power management units
    • Board provides usage as processor with 32-bit internal low power comsumption
    • +19.5dBm power output at802.11b mod

Prepared by  T-Soft E-Commerce.