Pro Micro Clone 5V 16 Mhz For Arduino

Product Code
Brand / Origin
Without Vat
37.61 TL
Out of stock Alert when in stock
Same Day Shipping
If you purchase before 3.30 pm, your products will ship at the same day. Except saturday and sunday
Add to Favorites
You can add this product on your list and check it later.
Add Comment
Featured Campaigns Related the Product



  • Features
  • Payment Options
  • Comments (2)
  • Recommend
  • Images
  • Suggestion Box
  • The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.
    This tiny little board does all of the neat-o Arduino tricks that you’re familiar with: 9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin on not VCC.
    Pro Micro Technical Specs:
    • ATmega32U4 running at 5V/16MHz
    • Supported under Arduino IDE v1.0.1
    • On-Board micro-USB connector for programming
    • 9 x 10-bit ADC pins
    • 12 x Digital I/Os (5 are PWM capable)
    • Rx and Tx Hardware Serial Connections
    • Dimensions: 3.30 x 1.78 (cm)
    Arduino Pro Micro Pinout diagramme
    Documents and Useful Links:
Prepared by  T-Soft E-Commerce.