if (PAGE_TYPE != 'approve'){}

Makeblock Auriga

Product Code
:
16719
Brand / Origin
:
Makeblock
In Stock
:
8
Without Vat
:
209.34 TL
Quantity:

-

+

Aynı Gün Kargo
Saat 15:00’e kadar yapılan alımlarda aynı gün kargo imkanı
Add to Favorites
Bu ürünü listenize ekleyerek daha sonra inceleyebilirsiniz.
Add Comment
Share:
Product Related Featured Campaigns

{{CMP.TITLE}}

{{CMP.DESCRIPTION}}

  • Features
  • Payment Options
  • Comments (0)
  • Recommend
  • Images
  • Suggestion Box
  • Me Auriga is the updated version of Orion which equipped with several sensors. The previous two red ports have been changed into four but remain the functions. Also, PORT5 is isolated only with serial communication function. So it can't be used to update program and is only for communication. Also, it is compatible with USB serial port. PORT6 to PORT10 are compatible with dual-digital, simulation, I2C bus, unibus, and simulated serial port. Me Auriga has encoder motor port, smart servo port and LED Ring Panel port (with power switch). Besides, the PCB is also enlarged.


    NOTE: The plastic case is a little difficult to open, so please slightly pry off its corners first, then open it. See the GIF.
     


    Specifications:

    • Easy to connect with sensors, electronic modules and motor drives;

    • Support DC motors, stepper motors, servo motors, smart servos, encoder motors, etc;

    • Drive two encoder motors at the same time; Over-current protection – 2.4A (instantaneous);

    • One power switch to control the whole circuit;

    • PORT5-PORT10 support continuously 5V 2.4A output (up to 3A);

    • PORT1-PORT4 support continuously 3.5A output (up to 5A);

    • PORT5-PORT10 support short-circuit protection and over-current protection for 3A;

    • PORT1-PORT4 support short-circuit protection and over-current protection for 3.5A;

    • USB port with antistatic protection;

    • Peripherals:

      • Gyroscope

      • Sound sensor

      • Passive buzzer

      • Temperature sensor

      • 12 PXL LED RGB panel with light intensity sensor


    Technical Specifications:

    • Output Voltage 5V DC & 6 - 12V DC
    • Input Voltage 6 - 12V DC
    • Maximum instantaneous output current (PORT1-PORT4) 5A (continuous output: 3A)
    • Maximum instantaneous output current (PORT5-PORT10) 3A (continuous output: 2.4A)
    • Communication Mode UART, I2C, digital input/output, analog input/output
    • Main Controller Atmega 2560
    • Circuit Board Dimension 100 x 65x 18 mm (L x W x H)
    • Package Dimension 188 x 150 x 29mm (7.40 x 5.90 x 1.14inch)


    For more information, please click here.



Prepared by  T-Soft E-Commerce.