- Payment Options
- Comments (0)
- Suggestion Box
You can do your location control applications with easy to use NEMA series bipolar step motors, set motor revolution with step motor driver cards. You can get the torque you need in your projects with this 19 kg-cm high power hybrid step motor.
In one full tour it can do 1.8 degree 200 steps. It draws 2.8A current for each phase on 3.2V voltage. Control on 4 cable step motor is done through red, black, blue and green cables.
- Operating Voltage: 3.2V
- Drawned Current on Each Phase: 2800mA @3.2V
- Phase Resistor Value: 1.13 Ohm
- Phase Inductor Value: 3.6 mH
- Step Angle: 1.8°
- Step Number on Each Tour: 200
- Holding Torque: 19 kg-cm
- Sizes: 56.4x76x76mm (NEMA 23)
- Motor Shaft Thickness: 5mm
- Cable Lenght: 30cm
- Weight: 1kg
Sizes on diagram are mm.
Click here, for product datasheet.
Motor's connection according to cable colours; BLK: Black, GRN: Green, RED: RED, BLU: BLUE.
It can be used with 5mm hubs
Step motor's inside image.
Step Motor Applications:
Step motors can be used in many applications which the location control is important.
-3D printers & prototyping machines
-Hold and place machines
Pololu bipolar step motors; form left to right; 20x30, 28x32, 28x45, 35x26, 35x28, 35x36 mm.