Güneş Panel Güç Yönetim Kartı (5V Panel ile Uyumlu)

Ürün Kodu
:
18405
Marka / Menşei
:
DFROBOT
Miktar
:
2
Fiyat
:
57,94 TL + KDV
KDV Dahil Fiyat
:
68,37 TL
Aynı Gün Kargo
Saat 15:00’e kadar yapılan alımlarda aynı gün kargo imkanı
Alışveriş Listeme Ekle
Bu ürünü listenize ekleyerek daha sonra inceleyebilirsiniz.
Yorum Ekle
Ürünle İlgili Öne Çıkan Kampanyalar

{{CMP.TITLE}}

{{CMP.DESCRIPTION}}

  • Ürün Özellikleri
  • Ödeme Seçenekleri
  • Yorumlar (0)
  • Tavsiye Et
  • Resimler
  • Öneri Kutusu
  • INTRODUCTION

    The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application engineers.

    Solar Power Manager 5V is a small power and high-efficiency solar power management module designed for 5V solar panel.
    It features as MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel. The module can provide up to 900mA charging current to 3.7V Li battery with USB charger or solar panel. The ON/OFF controllable DC-DC converters with 5V 1A output satisfies the needs of various solar power projects and low-power applications. The module also employs various protection functions for battery, solar panel and output, which greatly improves the stability and safety of your solar projects.
     
    Check the brief specification for all Solar Power Manager Series Products.
     
    Version History
    V1.0: It is highly recommended to use a 3.7V lipo battery with protection circuits to improve battery safety.
    V1.1(Newest): Battery (BAT IN) overcurrent and overdischarge protection is added to improve battery safety. It can be use for 3.7 lipo battery no matter it is packed with protection circuits or not.


    Board Overview


    Solar Power Manager 5V Board Overview 
    Solar Power Manager 5V 

    Connection Diagram
    Solar Power Manager 5V Connection Diagram
    Build a solar powered system
    Solar Power Manager Series
    Solar Power Manager (for 9V/12V/18V solar panel)Solar Power Manager 5VSolar Power Manager Micro (2V 160mA Solar Panel Included)Solar Power Manager For 12V Lead-Acid Battery
    NameSolar Power Manager v1.0Solar Power Manager 5v v1.1Solar Power Manager Micro v1.0Solar Power Manager v1.0
    SKUDFR0535DFR0559DFR0579DFR0580
    Solar Power Management ICLTC3652CN3065SPV1050CN3767
    Solar Input Voltage7V-30V4.4V-6V0.5V-4V15V-25V
    Maximum Charge Current2A(Solar/USB)900mA(Solar/USB)70mA(Solar)/100mA(USB)4A(Solar)
    TopologyDC-DC BuckLinear RegulatorDC-DC BoostDC-DC Buck
    Battery3.7V Lithium Battery3.7V Lithium Battery3.7V Lithium Battery12V Lead-Acid Battery
    MPPT9V/12V/18V Optional5V Fixed75% Open VoltageFixed 18V
    Battery ProtectionsOver Charge/Over Discharge/Over Current/Reverse Connection ProtectionsOver Charge/Over Discharge/Over Current/Reverse Connection ProtectionsOver Charge/Over Discharge/Reverse Connection ProtectionsOver Charge/Over Discharge/Reverse Connection Protections
    Output ProtectionsShort Circuit/Over Current/Over Heat ProtectionsShort Circuit/Over Current ProtectionsShort Circuit/Over Current ProtectionsShort Circuit/Over Current/Over Heat Protections
    USB Charge INYesYesYesNo
    USB OUT5V 1.5A5V 1ANo5V 2.5A x2
    Regulated OUTThree Regulated Outputs 3.3V 1A;5V 1.5A;9V/12V 0.5AOne Regulated Output 5V 1AOne Regulated Output 3.3V 90mATwo Outputs 5V 5A; 12V 8A
    Dimension78.0mm×68.0mm33.0mm×63.0mm30.0mm×30.0mm68.0mm×68.0mm
    Features

    A complete multifunction solar power management module.

    Applications: Small Solar Street Lamp, Solar Powered Robots 

    For 9V/12V/18V Solar Panels within20w

    A small and easy-to-use 5V solar power management module.

    Applications: Solar Power Bank, Solar Environment Monitors

    For 5V Solar Panels within 10W

    A micro power solar power management module for low-power sensors and controllers.

    Applications: Wireless Sensor Network, BLE iBecon

    For 1V/2V/3V Solar Panels within 0.5W

    A medium power solar management module for 12V lead-acid batteries.

    Applications: Street lighting, intelligent agriculture, environmental monitoring station, UPS

    For 18V Solar Panels within 100W

    FEATURES

    • Constant voltage MPPT algorithm, maximizing solar panel efficiency
    • Designed for 5V solar panel
    • Double charging mode: solar/USB charger (900mA max charge current)
    • 5V ON/OFF controllable regulated power supply for low-power applications
    • All-round protection functions
    • USB connector with ESD shell

    APPLICATIONS

    • Smart solar environment monitor system
    • Solar powered robot
    • Small solar street lamp
    • Solar power bank

    SPECIFICATION

    • Solar Power Management IC: CN3065
    • Solar Input Voltage (SOLAR IN): 4.5V~6V
    • Battery Input (BAT IN): 3.7V Single cell Li-polymer/Li-ion Battery
    • Charge Current(USB/SOLAR IN): 900mA Max trickle charging, constant current, constant voltage three phases charging
    • Charging Cutoff Voltage (USB/SOLAR IN): 4.2V±1%
    • Regulated Power Supply: 5V 1A
    • Regulated Power Supply Efficiency (3.7V BAT IN): 86%@50%Load
    • USB/Solar Charge Efficiency: 73%@3.7V 900mA BAT IN
    • Quiescent Current: <1 mA
    • Operation Temperature: -40℃~85℃
    • Dimension: 33.0mm*63.0mm
    • Protection Functions:
    1. BAT IN: over charge/over discharge/over current/reverse connection protection
    2. 5V/USB OUT: short circuit/over current/over heat protection
    3. SOLAR IN: reverse connection protection

    DOCUMENTS

    SHIPPING LIST

    • Solar Power Manager 5V                                              x1
    • 2.54mm Black Jumper                                                  x1
    • M3*10mm Nylon Pillar                                                   x4
    • M3*5mm Stainless Steel Screw                                    x4
    • 14*14*7mm Black Aluminum Cooling Fin                      x1
    • 14*14*0.5mm Thermal Conductive Silicone Pad           x1
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.