Electroluminescent (EL) Panel - 10cm x 10cm White - AF625

Product Code
:
16594
Brand / Origin
:
Adafruit
Quantity
:
1
Without Vat
:
106.70 TL
Discount Price
:
80.03 TL
%25
Quantity:

-

+

Same Day Shipping
If you purchase before 3pm, your products will ship at the same day. Except saturday and sunday
Add to Favorites
You can add this product on your list and check it later.
Add Comment
Featured Campaigns Related the Product

{{CMP.TITLE}}

{{CMP.DESCRIPTION}}

  • Features
  • Payment Options
  • Comments (0)
  • Recommend
  • Images
  • Suggestion Box
  • Electroluminescent wire (often abbreviated as EL wire) is a thin copper wire coated in a phosphor which glows when an alternating current is applied to it. EL materials are not only available in wire form, there also exists EL panels and EL tape. These materials can be used in a wide variety of applications—vehicle and/or structure decoration, safety and emergency lighting, toys, clothing etc.

    All EL materials work with AC, so they need an inverter circuit to work. There are portable inverters which can be used in wearable applications and also there exist DC powered inverters which either can be powered by a battery packs or DC wall adapters.

    This is a big sheet of flexible plastic coated with EL material so its like one big glowing square. It emits an even white glow over the entire shape, and you can even cut it into any shape you want using scissors as long as the connector is still attached (you'll probably need a few inches of the edge as well). Another option if you want to have a custom design, we suggest cutting something opaque to 'mask it' or printing onto a transparency and placing that on top. We do not suggest laser cutting it (the coating may be toxic), although a vinyl-cutter might work OK.

    Measures 10.4 cm x 10.4 cm (approx. 4" x 4"), about 0.5mm thick. The glowing part is 10 cm x 10 cm. Its covered in what seems to be PVC, the panel is thus spill proof - but note that the connector is NOT waterproof, just a bit of heatshrink. This isn't something we would suggest leaving outdoors for extended periods.

    This panel is not going to run on our pocket inverter, you really need to have 12V! The full panel draws about 210 mA from a 12V supply. For portable use, we suggest a 8xAA battery holder.

    Technical Details:

    • Glow Size: 10 cm x 10 cm (3.95" x 3.95")
    • Plastic Size: 10.4 cm x 10.4 cm (4.1" x 4.1"), about 0.5mm thick
    • Panel lifetime: >25000 hours
    • Operating voltage: 60-250VAC
    • Operating Frequency: 50-5000HZ
    • Current Draw: 0.14mA/cm2 (max) @ 110V / 400Hz
    • Initial Brightness: 75 cd/m2
    • Operating Temperature: -50 C / 65 C
    • 45 nF per panel
Prepared by  T-Soft E-Commerce.