- Payment Options
- Comments (0)
- Suggestion Box
This motor has 19:1 reduction rate and 500Rpm at 12V. Through encoder, which is at back side of the motor, you can icrease rpm and turning speed. Motor shaft output is 6mm D shaft. No load motor draws 300mA current. Stall torque is 5kg/cm.
This powerful motor has 6 seperate reducton options. You can view reduction rates from list which is shown in below.
These motors can work with 1V, but 12V is recommended operation voltage.
Through 6 M3 screw montage holes which are at the front side of the motor, you can immobilize your motor as you width.You can use 37D Metal Motor Grippers too.These grippers are compatible with motor.
You can view technical drawing of motor in below. Reduction dimension which is shown as X, is 22mm for 19:1 and 29:1 motors, 24mm for 50:1 and 67:1 and 26,5mm for 100:1 and 131:12 motors.
- Dimensions : 37Dx52L
- Weight : 198 gr
- Shaft diameter : 6mm
- Reduction rate : 30:1
- Speed (12V) : 350 Rpm
- No load current (12V) : 300 mA
- Stall current (12V) : 5 A
- Stall torque (12V) : 8 kg/cm