- Payment Options
- Comments (0)
- Suggestion Box
This motor has 70:1 reduction rate and 150Rpm at 12V. Through encoder, which is at back side of the motor, you can icrease rpm and turning speed. Motor shaft output is 6mm D shaft. No load motor draws 150mA current. Stall torque is 27kg/cm.
This powerful motor has 6 seperate reducton options. You can view reduction retas from list which is shown in below.
These motors can work with 1V, but 12V is recommended operation voltage.
Through 6 M3 screw montage holes which are at the front side of the motor, you can immobilize your motor as you widh.You can use 37D Metal Motor Grippers too.These grippers are compatible with motor.
- Dimensions : 37Dx54L
- Weight : 190 gr
- Shaft diameter : 6mm
- Reduction rate : 70:1
- Speed (12V) : 150 Rpm
- No load current (12V) : 0.15A
- Stall current (12V) : 5.5 A
- Stall torque (12V) : 27kg·cm3