12V 37mm 11,000 Rpm High Powered Gearless Dc Motor With Encoder

Product Code
Brand / Origin
Without Vat
151.15 TL



Same Day Shipping
If you purchase before 3.30 pm, your products will ship at the same day. Except saturday and sunday
Add to Favorites
You can add this product on your list and check it later.
Add Comment
Featured Campaigns Related the Product



  • Features
  • Payment Options
  • Comments (0)
  • Recommend
  • Images
  • Suggestion Box
  • This motor has 1100 Rpm at 12V. Product send as gearless. Product is completely compatible with gear part of 37mm gearmotors. Through this, you can change this motor with your other motors which have a solid gear. An encoder is available at the back side of the motor, so you can increase turning speed and tour number. So, motor can be used at sensitive control systems. Motor draws 300mA at free run. Stall torque is 0.3kg/cm.

    Technical Features:
    • Operation Voltage: 12V
    • Speed: 11000 Rpm
    • No load current: 300mA
    • Stall Current: 5A
    • Stall Torque: 0.3 kg- cm
    • Pinion Gear Features:
          -Metric Module = M0.5
          -Gear number: 10T
          -Face thickness: 4mm
          -Pressure angle: 20°
          -Gear position: 9 cm from top of the motor to top of the gear

    Encoder Connections:
      • Red: Motor + point
      • Black: Motor - point
      • Green: Encoder GND
      • Blue: Encoder Vcc (3.5-20V)
      • Yellow: Encoder A output
      • White: Encoder B output

      12 v 37 mm 11000 rpm enkoderli yüksek güçlü redüktörsüz dc motor enkoder kullanımı

      Usage of Encoder:

      Magnetic hall sensor needs voltage between 3.5V - 20V and draws approximately 10mA. There is 90° square wave phase difference between A and B outputs at 0-Vcc level. Freqency of these waves specify speed of the motor, permutation of these waves specify turning direction. Through number of falling and rising edge of A and B outputs, 48 pulse is received at a full tour of motor shaft.

    Prepared by  T-Soft E-Commerce.