sadsad x

12V 37mm 10,000 Rpm High Powered Gearless Dc Motor With Encoder

Product Code
Brand / Origin
Without Vat
215.69 TL



Same Day Shipping
Orders placed until 3:00 on weekdays and 10:30 on Saturday are shipped the same day.
Add to Favorites
Click here to add this product to your list and review it later.
Technical Service
We are always with you with our experienced staff and advanced support services.
Refund Guarantee
We carry out the process without upsetting you with a 14-day return guarantee.
Add Comment
Featured Campaigns Related the Product



  • Features
  • Payment Options
  • Comments (0)
  • Recommend
  • Images
  • Suggestion Box
  • This motor has 10000 Rpm at 12V. Product send as gearless. Product is completely compatible with gear part of 37mm gearmotors. Through this, you can change this motor with your other motors which have a solid gear. An encoder is available at the back side of the motor, so you can increase turning speed and tour number. So, motor can be used at sensitive control systems. Motor draws 200mA at free run. Stall torque is 0.3kg/cm.

    Technical Features:
    • Operation Voltage: 12V
    • Speed: 1000 Rpm
    • No load current: 200mA
    • Stall Current: 5.5A
    • Stall Torque: 0.3 kg- cm
    • Pinion Gear Features:
          -Metric Module = M0.5
          -Gear number: 10T
          -Face thickness: 4mm
          -Pressure angle: 20°
          -Gear position: 9 cm from top of the motor to top of the gear

    Encoder Connections:
      • Red: Motor + point
      • Black: Motor - point
      • Green: Encoder GND
      • Blue: Encoder Vcc (3.5-20V)
      • Yellow: Encoder A output
      • White: Encoder B output

      Usage of Encoder:

      Magnetic hall sensor needs voltage between 3.5V - 20V and draws approximately 10mA. There is 90° square wave phase difference between A and B outputs at 0-Vcc level. Freqency of these waves specify speed of the motor, permutation of these waves specify turning direction. Through number of falling and rising edge of A and B outputs, 48 pulse is received at a full tour of motor shaft.

    Prepared by  T-Soft E-Commerce.